TP-Link TL-PA4010P manual Installing Management Utility

Page 15

TL-PA4010PAV500 Powerline Adapter With AC Pass Through

Chapter 3 Installing Management Utility

Please verify that no other Powerline Adapter or any Encryption Management Utilities are installed before installing the provided software. If other Powerline Utilities are installed, uninstall them and restart your personal computer before installing this provided software.

Note:

To install Management Utility, please make sure that WinPcap 4.1.2 has been installed in your computer. Otherwise, a window will pop up for you to install WinPcap 4.1.2.

Take the following procedures to properly install the provided Management Utility:

Step 1: Insert the Resource CD into your CD-ROM drive, and then the following Setup Wizard will automatically pop up on your computer’s screen.

Step 2: Select 500Mbps Powerline and click Management Utility, and then the program installation process will carry out and copy all the necessary files to your system.

9

Image 15

Contents TL-PA4010P AV500 Powerline Adapter With AC Pass Through Copyright & Trademarks FCC Statement Safety Information Yang Hongliang Product Manager of International Business Declaration of ConformityContents Conventions Package ContentsImportant Safety Instructions IntroductionSystem Requirement Status Indication LED IndicatorDescription Physical InterfaceTL-PA4010PAV500 Powerline Adapter With AC Pass Through Connecting Mechanism IntroductionConnection Instruction Hardware Connection Computer  Note Hardware Connection InternetInstalling Management Utility TL-PA4010PAV500 Powerline Adapter With AC Pass Through TL-PA4010PAV500 Powerline Adapter With AC Pass Through TL-PA4010PAV500 Powerline Adapter With AC Pass Through Status Using the Management UtilitySet Local Device’s Network Name NetworkRename the Remote Device/Enter Password Add Device System AdvancedUpgrade Firmware To upgrade the devices firmware, follow these instructions Reset DeviceSet All Devices’ Network Name Pair Secure with 128 bits-AES Advanced Feature How to Use the Pair ButtonsSet Up a Secured Powerline AV Network with the Pair Button Create a secured Powerline network using the Pair button：Leave an existing secured Powerline AV Network Join an existing secured Powerline AV NetworkEthernet LED does not light up. Ans. Check the following Appendix a TroubleshootingPower LED does not light up. Ans. Check the following Powerline LED does not light up