TP-Link TL-PA250 manual Privacy

Page 22

TL-PA250AV200+ Powerline Adapter with AC Pass Through

4.2 Privacy

The Privacy configuration page provides a means for managing the local network and providing additional security for the logical network and also to select the devices that has to be included in the network. All Powerline devices are shipped using a default logical network (network name), which is normally “HomePlugAV”.

The Privacy configuration homepage allows you to change the Network Name of the Powerline Adapter that is currently connected to this computer into a private network. Reset the private network to universal public network by clicking on the “Use Default (Public Network)” or entering/editing “HomePlugAV” under column of “Private Network Name” is always available.

Note that every Powerline Adapter on your home network MUST have the same Network Password for connectivity to be established throughout your home.

)Note:

Changing the network name to anything other than “HomePlugAV” will show the network type on the Main configuration screen as “Private”.

17

Image 22

Contents TL-PA250 Copyright & Trademarks FCC Statement Important Safety Instructions Contents Introduction Package ContentsSystem Requirement LED Indicator Status IndicationPhysical Interface Interface DescriptionConnecting Mechanism Connection InstructionHardware Connection Computer Hardware Connection InternetTL-PA250AV200+ Powerline Adapter with AC Pass Through Installing Management Utility TL-PA250AV200+ Powerline Adapter with AC Pass Through TL-PA250AV200+ Powerline Adapter with AC Pass Through TL-PA250AV200+ Powerline Adapter with AC Pass Through Using the Management Utility MainTL-PA250AV200+ Powerline Adapter with AC Pass Through To upgrade the devices firmware, follow these instructions RenameEnter Password Add Device Reset Privacy Diagnostics TL-PA250AV200+ Powerline Adapter with AC Pass Through About Create a secured Powerline network using the Pair button： Advanced Feature How to Use the Pair ButtonsSet Up a Secured Powerline AV Network with the Pair Button Pair Secure with 128 bits-AESJoin an existing secured Powerline AV Network Leave an existing secured Powerline AV NetworkPowerline LED does not light up Appendix a Troubleshooting GuidePower LED does not light up. Ans. Check the following Ethernet LED does not light up. Ans. Check the followingGeneral Appendix B SpecificationsPhysical and Environment