Introduction, System Requirement | TP-Link TL-PA250 instruction

TL-PA250AV200+ Powerline Adapter with AC Pass Through

Chapter 1 Introduction

Congratulations on your purchase of this outstanding Powerline Adapter. This device is an AV200+ Powerline Adapter with AC Pass Through which transforms your house’s existing electrical wiring into a ubiquitous networking infrastructure. Simply plug thisAV200+ Powerline Adapter with AC Pass Through into an ordinary AC power outlet which will easily extend your Cable/xDSL broadband connection or existing Ethernet (LAN) network to any other electrical outlet in any room of a house without the need of any new cable.

This Powerline Adapter supports up to 200Mbps data rate over the existing household electrical circuit. With the data rate of 200Mbps, full multimedia application can easily be supported throughout the whole house in addition to Internet access. This Powerline Adapter uses the existing power lines installed in a home as a path to transmit digital data, voice, audio and video between devices.

To ensure data communication’s security and multimedia applications, this Powerline Adapter supports built-in 128-bit AES encryption.

The new Powerline Adapter TL-PA250 from TP-LINK provides extra convenience and better performance for your home network with its integrated electrical socket and mains filer. The common problem of wasting an electrical outlet is solved and additional terminal devices or multiple sockets can be connected to the adapter just like to a normal wall socket. What’s more, the data transmission in the network can be significantly improved by the integrated mains filter.With minimum setup, you can install and use this Powerline Adapter within minutes. Moreover, the adapter provides two useful functions.

1．Existing connection with a new unassociated device added via the Pair button.

2．Reset to default setting via the Management Utility.

A. System Requirement

a)At least two AC 100V ~ 240V power outlets with standard home power wiring

b)A computer with the following:

¾Operating System with TCP/IP installed

¾Pentium III compatible processor and above

¾Ethernet LAN card installed with TCP/IP protocol

¾64 MB RAM or more

¾50 MB of free disk space (Minimum)

¾CD-ROM Drive

B. Package Contents

The AV200+ Powerline Adapter with AC Pass Through package contains the following items:

¾One AV200+ Powerline Adapter with AC Pass Through (There are two AV200+ Powerline Adapter with AC Pass Throughs in Starter Kit)

¾One CAT-5 Ethernet Cable (There are two CAT-5 Ethernet Cables in Starter Kit)

¾One Quick Installation Guide

¾One CD-ROM (Management Utility and User Manual)

If any of the above items are damaged or missing, please contact your dealer immediately.