TP-Link TL-PA250 manual Diagnostics

Page 23

TL-PA250AV200+ Powerline Adapter with AC Pass Through

¾Set Local Device Only: Click this tab to change the network name of the local Powerline Adapter device only. All Powerline Adapter devices seen on the Main configuration homepage prior to this will be no longer present in the new network, effectively making the local devices not to communicate to the devices which were in the old logical network. Devices previously set up with the same logical network (same network name) will appear in the device list after selecting this option.

¾Set All Devices: The Set All Devices button is used to change the logical network of all devices that appear on the Main configuration homepage whose Device’s Password had been entered for the same logical network. A dialog window will appear to report the success of this operation. For devices whose device passwords were not entered, this operation will fail and will report a failure message.

4.3 Diagnostics

The Diagnostics homepage shows the System Information and Remote Device History of all remote devices seen over a period of time which are only readable. Click on the “Diagnostics” tab and the following screen will display.

18

Image 23
Contents TL-PA250 Copyright & Trademarks FCC Statement Important Safety Instructions Contents System Requirement Package ContentsIntroduction Status Indication LED IndicatorInterface Description Physical InterfaceConnection Instruction Connecting MechanismHardware Connection Internet Hardware Connection ComputerTL-PA250AV200+ Powerline Adapter with AC Pass Through Installing Management Utility TL-PA250AV200+ Powerline Adapter with AC Pass Through TL-PA250AV200+ Powerline Adapter with AC Pass Through TL-PA250AV200+ Powerline Adapter with AC Pass Through Main Using the Management UtilityTL-PA250AV200+ Powerline Adapter with AC Pass Through Rename To upgrade the devices firmware, follow these instructionsEnter Password Add Device Reset Privacy Diagnostics TL-PA250AV200+ Powerline Adapter with AC Pass Through About Pair Secure with 128 bits-AES Advanced Feature How to Use the Pair ButtonsSet Up a Secured Powerline AV Network with the Pair Button Create a secured Powerline network using the Pair button:Leave an existing secured Powerline AV Network Join an existing secured Powerline AV NetworkEthernet LED does not light up. Ans. Check the following Appendix a Troubleshooting GuidePower LED does not light up. Ans. Check the following Powerline LED does not light upPhysical and Environment Appendix B SpecificationsGeneral