TP-Link TL-PA250 manual Appendix B Specifications, General, Physical and Environment

Page 29

TL-PA250AV200+ Powerline Adapter with AC Pass Through

Appendix B: Specifications

		General
	Standards	HomePlug AV, IEEE802.3, IEEE802.3u

	Modulation Technology	OFDM

	Protocol Support	TCP/IP

	Data Rate	200Mbps

	Range	300meters in house

	LEDs	Power, Powerline, Ethernet

		1 Pair Button
	Interface	1 Ethernet LAN Port
		1 Integrated Electrical Socket

	Encryption	128-bit AES

	Power Consumption	3W

	Power Output	10A Max Load

		Physical and Environment
	Dimensions (L×W×H)	4.3x2.3x1.7 inch (110×58×43mm) (exclude power plug)
	Dimensions (L×W×H)	4.3x2.3x3.1 inch (110×58×80mm) (include power plug)
		4.3x2.3x3.1 inch (110×58×80mm) (include power plug)

	Operating Temperature	0℃~40℃ (32℉~104℉)

	Operating Humidity	10%~90%RH, Non-condensing

24

Image 29

Contents TL-PA250 Copyright & Trademarks FCC Statement Important Safety Instructions Contents System Requirement Package ContentsIntroduction Status Indication LED IndicatorInterface Description Physical InterfaceConnection Instruction Connecting MechanismHardware Connection Internet Hardware Connection ComputerTL-PA250AV200+ Powerline Adapter with AC Pass Through Installing Management Utility TL-PA250AV200+ Powerline Adapter with AC Pass Through TL-PA250AV200+ Powerline Adapter with AC Pass Through TL-PA250AV200+ Powerline Adapter with AC Pass Through Main Using the Management UtilityTL-PA250AV200+ Powerline Adapter with AC Pass Through Rename To upgrade the devices firmware, follow these instructionsEnter Password Add Device Reset Privacy Diagnostics TL-PA250AV200+ Powerline Adapter with AC Pass Through About Set Up a Secured Powerline AV Network with the Pair Button Advanced Feature How to Use the Pair ButtonsCreate a secured Powerline network using the Pair button： Pair Secure with 128 bits-AESLeave an existing secured Powerline AV Network Join an existing secured Powerline AV NetworkPower LED does not light up. Ans. Check the following Appendix a Troubleshooting GuidePowerline LED does not light up Ethernet LED does not light up. Ans. Check the followingPhysical and Environment Appendix B SpecificationsGeneral