¾Compatible with LTE/HSPA/UMTS/EVDO USB dongle
¾Automatic 3G/4G / WAN failover
¾Wireless N speed up to 150Mbps
¾1T2R MIMO, CCA technologies deliver greater coverage and higher speed
¾Wireless security encryption easily at a push of “WPS” button
¾WDS wireless bridge provides seamless bridging to expand your wireless network
¾Backward compatible with 802.11b and 802.11g devices
¾Provides
¾Supports 3G/4G/Dynamic IP/Static IP/PPPoE/L2TP/PPTP Internet access
¾Supports Virtual Server, Special Application and DMZ host
¾Supports UPnP, Dynamic DNS, Static Routing
¾Provides
¾
¾Connects Internet on demand and disconnects from the Internet when idle for PPPoE
¾Provides
¾Supports Flow Statistics
¾Supports firmware upgrade and Web management
1.4Panel Layout
1.4.1The Front Panel
|
|
| Figure |
The Router’s LEDs are located on the front panel (View from left to right). | |||
|
|
|
|
| Item | Status | Indication |
| (PWR) | On | Power is on. |
| Off | Power is off. | |
|
| ||
|
| On | The Router is initializing. |
| (SYS) |
|
|
| Flashing | The Router is working properly. | |
|
| Off | The Router has a system error. |
| (WLAN) | Flashing | The Wireless function is enabled. |
| Off | The Wireless function is disabled. | |
|
| ||
| (WAN) | On | A device is linked to the corresponding port but there is no |
| activity. | ||
|
| ||
| Flashing | An active device is linked to the corresponding port. | |
|
| Off | No device is linked to the corresponding port. |
| (USB) | On | The USB 3G/4G modem is connected but no data being |
| transferred. | ||
|
|
| |
|
| Flashing | Data is received or sent through the 3G/4G modem. |