TP-Link TL-MR3220 manual Forwarding, Virtual Servers

TL-MR32203G/4G Wireless N Router User Guide

1.Click the Add New … button. (Pop-up Figure 4-33)

2.Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address in dotted-decimal notation of the computer you wish to add.

3.Click the Save button when finished.

Figure 4-33 Add or Modify an Address Reservation Entry

To modify or delete an existing entry:

1.Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.

2.Modify the information.

3.Click the Save button.

4.8Forwarding

Figure 4-34 The Forwarding menu

There are four submenus under the Forwarding menu (shown in Figure 4-34):Virtual Servers, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding function.

4.8.1Virtual Servers

Choose menu “Forwarding→Virtual Servers”, you can view and add virtual servers in the next screen (shown in Figure 4-35). Virtual servers can be used for setting up public services on your LAN, such as DNS, Email and FTP. A virtual server is defined as a service port, and all requests from the Internet to this service port will be redirected to the computer specified by the server IP. Any PC that was used for a virtual server must have a static or reserved IP Address because its IP Address may be changed when using the DHCP function.

-49-