TL-MR3220 3G/4G Wireless N Router User Guide
traffic passing through the session conforms to the protocol. SPI Firewall is enabled by factory default. If you want all the computers on the LAN exposed to the outside world, you can disable it.
¾VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using IPSec, PPTP, or L2TP protocols to pass through the Router’s firewall.
z PPTP Passthrough -
z L2TP Passthrough - Layer 2 Tunneling Protocol (L2TP) is the method used to enable
z IPSec Passthrough - Internet Protocol Security (IPSec) is a suite of protocols for ensuring private, secure communications over Internet Protocol (IP) networks, through the use of cryptographic security services. To allow IPSec tunnels to pass through the Router, keep the default, Enable.
¾ALG - It is recommended to enable Application Layer Gateway (ALG) because ALG allows customized Network Address Translation (NAT) traversal filters to be plugged into the gateway to support address and port translation for certain application layer "control/data" protocols such as FTP, TFTP, H323, RTSP etc.
zFTP ALG - Select Enable, to allow FTP servers to operate properly.
zTFTP ALG - Select Enable, to allow TFTP servers to operate properly.
zH323 ALG - Select Enable, to allow H323 services to operate properly.
zRTSP ALG - Select Enable, to allow RTSP services to operate properly. Click the Save button to save your settings.
4.9.2Advanced Security
Choose menu “Security → Advanced Security”, you can protect the Router from being attacked by