CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
National Restrictions
This device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:
Country | Restriction | Reason/remark | |
Bulgaria | None | General authorization required for outdoor use and | |
public service | |||
|
| ||
|
|
| |
| Outdoor use limited to | Military Radiolocation use. Refarming of the 2.4 GHz | |
France | 10 mW e.i.r.p. within | band has been ongoing in recent years to allow current | |
the band | relaxed regulation. Full implementation planned 2012 | ||
| |||
| MHz |
| |
|
|
| |
Italy | None | If used outside of own premises, general authorization is | |
required | |||
|
| ||
|
|
| |
Luxembourg | None | General authorization required for network and service | |
supply(not for spectrum) | |||
|
| ||
|
|
| |
Norway | Implemented | This subsection does not apply for the geographical area | |
within a radius of 20 km from the centre of | |||
|
| ||
|
|
| |
Russian Federation | None | Only for indoor applications | |
|
|
|
Note: Please don’t use the product outdoors in France.
This device has been designed to operate with the antennas listed below, and having a maximum gain of 5 dBi. Antennas not included in this list or having a gain greater than 5 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.”
Industry Canada Statement:
This device complies with
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.