TP-Link TL-MR3220 manual By PBC Push Button Configuration, Method One

TL-MR32203G/4G Wireless N Router User Guide

Figure 4-2 WPS

¾WPS Status - Enable or disable the WPS function here.

¾Current PIN - The current value of the Router's PIN displayed here. The default PIN of the Router can be found in the label or User Guide.

¾Restore PIN - Restore the PIN of the Router to its default.

¾Gen New PIN - Click this button, and then you can get a new random value for the Router's PIN. You can ensure the network security by generating a new PIN.

¾Add Device - You can add the new device to the existing network manually by clicking this button.

b). To add a new device:

If the wireless adapter supports Wi-Fi Protected Setup (WPS) or QSS (Quick Secure Setup), you can establish a wireless connection between wireless adapter and Router by using either Push Button Configuration (PBC) method or PIN method.

)Note:

To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS function meanwhile.

For the configuration of the new device, here takes the Wireless adapter of our company for example.

I.By PBC (Push Button Configuration)

If the wireless adapter supports Wi-Fi Protected Setup or Quick Secure Setup and the PBC method, you can add it to the network by PBC with the following two methods.

Method One:

Step 1: Press the WPS/RESET button on the rear panel of the Router.

Step 2: Press and hold the WPS or QSS button of the adapter directly for 2 or 3 seconds.

-16-