TP-Link TD-W8900G manual Follow the instructions below to Add or Edit an ATM PVC

TD-W8900G54M Wireless ADSL2+ Router User Guide

Figure 5-3

¾WAN Port Information Table: This table describes the WAN port settings and the relevant manipulation to each interface.

¾Remove: Select the check box in the table (shown in Figure 5-3)and then click the Remove tab, the corresponding interface will be deleted in the table.

¾Add: Click the Add button, you can add a new interface in the next screen (shown in Figure 5-4).

¾Save/Reboot: If you are sure of the settings, choose Save/Reboot to apply the changes and reboot the system.

)Note:

You have to reboot to activate the WAN interface and further configuration services over this interface. Click the Save/Reboot button to implement it.

Follow the instructions below to Add or Edit an ATM PVC

1.Click the Add button on the screen above (shown in Figure 5-3), then you will see the next screen as follows (Figure 5-4):

20