TP-Link TD-W8900G manual To add the IP Address, Passwords

TD-W8900G54M Wireless ADSL2+ Router User Guide

screen, this screen (shown in Figure 5-76)allows you to configure the IP Address for managing the Router.

Figure 5-76

To add the IP Address:

1.Click the Add button. You can add a new IP Address in the next screen (shown in Figure 5-77).

Figure 5-77

2.Enter the IP address of the management station permitted to access the local management services.

3.Click the Save/Apply button to save the IP Address.

4.Enable the Access Control Mode (shown in Figure 5-76).

)Note:

If Enabled, the Router will permit access to local management services from IP addresses contained in the Access Control List. If the Access Control mode is Disabled, the function will not validate, and all IP addresses can access to local management services. The services are the system applications listed in the Service Control List.

5.7.5.3. Passwords

Choose “Management”Æ“Access Control”Æ“Password”, you can see the screen (shown in

75