TP-Link TD-W8900G manual 3 NAT

TD-W8900G54M Wireless ADSL2+ Router User Guide

3.Type the MAC Address(00:13:8F:A9:E6:CA for instance) of the computer which you want to reserve an IP(192.168.1.100 for instance) for in the MAC Address text box;

4.Type the IP Address(192.168.1.100 for instance) you have reserved in the Reserved IP Address text box;

5.Click save botton to save the settings you have set;

)Note:

The MAC Address and IP Address added in the text box used for illustrating. That may be differences with your circs.

6.When you have saved the settings, the new entry will added to the Address Reservation screen showed below.

7.Click Save/Reboot bottun to save the settings and reboot the router.

)Note:

1.DHCP IP Reservation are not available for the connection type of Bridge here, they won’t display on the screen above (Figure 5-14)since only Bridge is selected.

2.DHCP IP Reservation are not available for the connection type of PPPoE with PPP IP Extention function selected, and they won’t display on the screen above (Figure 5-14)since PPP IP Extention is selected.

3.The function won't take effect until the router reboots.

5.4.3NAT

When you select PPPoA or PPPoE for the WAN Setup, or when you select Enable NAT (shown in Figure 5-10)for the type of MER or IPoA connection, you will see the NAT menu in the Web-based Utility (shown in Figure 5-15).

31