TP-Link TD-W8900G manual To remove a static routing entry, Rip

Page 55

TD-W8900G54M Wireless ADSL2+ Router User Guide

2.Enter the following data:

¾Destination Network Address: The Destination Network Address is the address of the network or host that you want to assign to a static route.

¾Subnet Mask: The Subnet Mask determines which portion of an IP Address is the network portion, and which portion is the host portion.

¾Gateway IP Address: If the Use Gateway IP Address checkbox is selected, you should type the Gateway address exactly in the text box, or else, the default Gateway address will be adopted for the Static Route.

¾Use Interface: If the Use Interface checkbox is selected, you should select the Interface name in the text box, or else, the default Use Interface will be adopted for the Static Route.

3.Click the Save/Apply button to save it.

To remove a static routing entry:

1.Select the Remove check box according to the entry in the Figure 5-35.

2.Click the Remove button, and the entry will be deleted.

)Note:

Default Gateway IP address should be specified since MER Interface is selected.

5.4.6.3. RIP

Choose “Advanced Setup”Æ“Routing”Æ“RIP”, you can see the RIP (Routing Information Protocol) screen, this screen allows you to configure the RIP (shown in Figure 5-37).

Figure 5-37

To activate RIP for the device, select the Enabled radio-button for Global RIP Mode. To configure an individual interface, select the desired RIP version and operation, followed by placing a check in the Enabled checkbox for the interface.

If you are sure about the settings, click the Save/Apply button to save the configuration.

48

Image 55

Contents Rev：1.0.1 Copyright & Trademarks FCC RF Radiation Exposure Statement FCC StatementTD-W8900G 54M Wireless ADSL2+ Router User GuidePackage contents Contents Appendix Wireless LAN ConfigurationConventions PurposeOverview of this User Guide Wireless Main FeaturesOverview of the Router Supporting Protocol Transmit Data-rate LED Explanation Front PanelName Status Description Back Panel Installation Environment RequirementsSystem Requirements Connect Adsl Line Connecting the RouterBest Location for Wireless Network Connection Wired network connectionHub or Switch to Router Connection Configure the RouterComputer to Router Connection TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide Configure PC TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide Login Basic Router ConfigurationDevice Info Advanced Setup Quick Setup1 WAN Follow the instructions below to Add or Edit an ATM PVC TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide PPPoA TD-W8900G54M Wireless ADSL2+ Router User Guide MER PPPoETD-W8900G54M Wireless ADSL2+ Router User Guide Bridge IPoATD-W8900G54M Wireless ADSL2+ Router User Guide 2 LAN TD-W8900G54M Wireless ADSL2+ Router User Guide 3 NAT Virtual Servers To setup a virtual server entry TD-W8900G54M Wireless ADSL2+ Router User Guide To add a new Port Triggering Port TriggeringDMZ Host To add a new DMZ Host SecurityALG IP Filtering Setup an Outgoing IP Filtering ruleTD-W8900G54M Wireless ADSL2+ Router User Guide Setup an Incoming IP Filtering rule MAC Filtering To setup a MAC Filtering ruleParental Control To setup a Parental Control rule Quality of ServiceTD-W8900G54M Wireless ADSL2+ Router User Guide Routing Default Gateway To add static routing entries Static RouteRIP To remove a static routing entryDNS Server 7 DNSDynamic DNS To setup DDNS, follow these instructions8 DSL Port Mapping TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide Wireless Basic Wireless LAN ConfigurationWEP Encryption Wireless SecurityConfigure WEP Encryption WPA Configure WPA settings WPA-PSK Configure WPA-PSK settingsWPA2 Mixed WPA2/WPA WPA2-PSKMixed WPA2/WPA-PSK Wireless -- MAC FilterForm of MAC Address must be xxxxxxxxxxxx, like 00130A55FF09 Wireless AdvancedTD-W8900G54M Wireless ADSL2+ Router User Guide Wireless Statistics DiagnosticsManagement SettingsBackup To back up the Router’s current settingsUpdate System Log To update the Router’s settingsTo View the System Log To Configure the System Log SettingsInternet Time To set the Router’s time 4 TR-069 clientRPC- Remote Procedure Calls Services Access ControlTo add the IP Address PasswordsTo change the password Update SoftwareTo update the Routers software RebootAppendix a Glossary AppendixTD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide LED LAN/WAN Appendix BSpecifications