TP-Link TD-W8900G manual To add a new Port Triggering

Page 42

TD-W8900G54M Wireless ADSL2+ Router User Guide

only need to enter the Server IP Address for the Virtual Server.

5.4.3.2. Port Triggering

Choose “Advanced Setup”Æ“NAT”Æ“Port Triggering”, you can set Port Triggering on the screen (shown in Figure 5-18).

Some applications require that specific ports in the Router's firewall should be opened for access by remote devices. Port Trigger dynamically opens up the 'Open Ports' in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote device using the triggering ports. The Router allows the remote party from the WAN side to establish new connections back to the application on the LAN side using the open ports. A maximum 32 entries can be configured.

Figure 5-18

¾Port Triggering Table: The table indicates the information about the Port Triggering entries.

Application (Name): This is the name of the Port Triggering. It is exclusive and must be filled.

Trigger: It includes the Protocol and the Start and End value of the Trigger Ports.

Open: It includes the Protocol and the Start and End value of the Open Ports

¾Add: Click the button to add a new entry.

¾Remove: Select the check box in the table (shown in Figure 5-18)and then click the Remove button, then the corresponding entry will be deleted in the table.

To add a new Port Triggering:

35

Image 42

Contents Rev：1.0.1 Copyright & Trademarks FCC Statement FCC RF Radiation Exposure Statement54M Wireless ADSL2+ Router User Guide TD-W8900GPackage contents Contents Wireless LAN Configuration AppendixPurpose ConventionsOverview of this User Guide Main Features WirelessOverview of the Router Supporting Protocol Transmit Data-rate Front Panel LED ExplanationName Status Description Installation Environment Requirements Back PanelSystem Requirements Wired network connection Connecting the RouterBest Location for Wireless Network Connection Connect Adsl LineConfigure the Router Hub or Switch to Router ConnectionComputer to Router Connection TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide Configure PC TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide Basic Router Configuration LoginDevice Info Quick Setup Advanced Setup1 WAN Follow the instructions below to Add or Edit an ATM PVC TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide PPPoA TD-W8900G54M Wireless ADSL2+ Router User Guide PPPoE MERTD-W8900G54M Wireless ADSL2+ Router User Guide IPoA BridgeTD-W8900G54M Wireless ADSL2+ Router User Guide 2 LAN TD-W8900G54M Wireless ADSL2+ Router User Guide 3 NAT Virtual Servers To setup a virtual server entry TD-W8900G54M Wireless ADSL2+ Router User Guide Port Triggering To add a new Port TriggeringDMZ Host Security To add a new DMZ HostALG Setup an Outgoing IP Filtering rule IP FilteringTD-W8900G54M Wireless ADSL2+ Router User Guide Setup an Incoming IP Filtering rule To setup a MAC Filtering rule MAC FilteringParental Control Quality of Service To setup a Parental Control ruleTD-W8900G54M Wireless ADSL2+ Router User Guide Routing Default Gateway Static Route To add static routing entriesTo remove a static routing entry RIP7 DNS DNS ServerTo setup DDNS, follow these instructions Dynamic DNS8 DSL Port Mapping TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide Wireless LAN Configuration Wireless BasicWireless Security WEP EncryptionConfigure WEP Encryption WPA Configure WPA settings Configure WPA-PSK settings WPA-PSKWPA2 WPA2-PSK Mixed WPA2/WPAWireless -- MAC Filter Mixed WPA2/WPA-PSKWireless Advanced Form of MAC Address must be xxxxxxxxxxxx, like 00130A55FF09TD-W8900G54M Wireless ADSL2+ Router User Guide Diagnostics Wireless StatisticsTo back up the Router’s current settings SettingsBackup ManagementUpdate To update the Router’s settings System LogTo Configure the System Log Settings To View the System LogInternet Time 4 TR-069 client To set the Router’s timeRPC- Remote Procedure Calls Access Control ServicesPasswords To add the IP AddressUpdate Software To change the passwordReboot To update the Routers softwareAppendix Appendix a GlossaryTD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide TD-W8900G54M Wireless ADSL2+ Router User Guide Appendix BSpecifications LED LAN/WAN