TP-Link TD-W8900G Wireless Advanced, Form of MAC Address must be xxxxxxxxxxxx, like 00130A55FF09

TD-W8900G54M Wireless ADSL2+ Router User Guide

Figure 5-58

Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s RADIUS. To filter wireless users by MAC Address, either permitting or blocking access. If you do not wish to filter users by MAC Address, select Disabled.

¾Allow: Click this button to allow wireless access by the devices listed on this screen.

¾Deny: Click this button to block wireless access from the devices listed on this screen.

¾Add: Click this button to add the MAC Address.

¾Remove: Click this button to remove the item of the MAC Address.

When you click the Add button, the picture that shown below will pop-up, and then you can enter the MAC Address in the MAC Address field.

)Note:

The form of MAC Address must be “xx:xx:xx:xx:xx:xx”, like “00:13:0A:55:FF:09”.

Figure 5-59

When you finished making changes to the MAC Filter List screen, click the Save/Apply button to save the changes.

5.5.4Wireless – Advanced

Choose “Wireless”Æ”Advanced”, you will see the screen of Wireless-Advancedsettings shown as below.

64