Archer C8 AC1750 Wireless Dual Band Gigabit Router
Figure 5-16 Add A New Device
Step 2: Enter the PIN number from the client device in the field on the WPS screen above. Then click Connect button.
Step 3: “Connect successfully” will appear on the screen of Figure 5-16, which means the client device has successfully connected to the router.
Note:
1)The WPS LED on the router will light green for five minutes if the device has been successfully added to the network.
2)The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the Wireless Function is enabled before configuring the WPS.
5.4.3Wireless Security
Choose menu “Advanced→Wireless 2.4GHz→Wireless Security”, you can configure the security settings of your wireless network. There are five wireless security modes supported by the router:
- 40 -