TP-Link AC1750 manual Wireless Security

Page 62

Archer C8 AC1750 Wireless Dual Band Gigabit Router

I.Use the Wi-Fi Protected Setup Button

Use this method if your client device has a Wi-Fi Protected Setup button.

Step 1: Press the WPS/Reset button on the back panel of the router

Step 2: Press and hold the WPS button of the client device directly. The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process.

Step 3: When the WPS LED is on, the client device has successfully connected to the router.

II. Enter the client device’s PIN on the router

Use this method if your client device does not have the WPS button, but has a Wi-Fi Protected Setup PIN number.

Step 1: Enable WPS. The default is enabled. Click the Add device button in Figure 5-28,then Figure 5-29will appear.

Figure 5-29 Add A New Device

Step 2: Enter the PIN number from the client device in the above PIN field. Then click Connect button.

Step 3: “Connect successfully” will appear on the screen of Figure 5-29,which means the client device has successfully connected to the router.

1)The WPS LED on the router will light green for five minutes if the device has been successfully added to the network.

2)The WPS function cannot be configured if the Wireless Function of the router is disabled. Please make sure the Wireless Function is enabled before configuring the WPS.

5.5.3Wireless Security

Choose menu “Advanced→Wireless 5GHz→Wireless Security”, you can configure the security settings of your wireless network.

There are five wireless security modes supported by the router: WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, and WEP.

- 51 -

Image 62

Contents Archer C8 Copyright & Trademarks FCC Statement Country Restriction Reason/remark 5150-5250 MHz Country Restriction Reason/remark5250-5350 MHz Country Restriction Reason/remark 5470-5725 MHz Country Restriction Reason/remarkKorea Warning Statements Safety Information Product Description AC1750 Wireless Dual Band Gigabit Router Yang Hongliang Product Manager of International BusinessContents Dhcp 100 Package Contents Overview of the router ConventionsMain Features Name Status Indication Panel LayoutFront Panel  RESET/WPS Rear PanelArcher C8 AC1750 Wireless Dual Band Gigabit Router System Requirements Installation Environment RequirementsConnecting the router Hardware Installation Quick Setup Archer C8WAN Connection Type Dynamic IPStatic IP PPPoE/Russian PPPoEL2TP Pptp Archer C8 AC1750 Wireless Dual Band Gigabit Router Network Map InternetArcher C8 AC1750 Wireless Dual Band Gigabit Router  Note Archer C8 AC1750 Wireless Dual Band Gigabit Router Archer C8 AC1750 Wireless Dual Band Gigabit Router File Sharing WirelessUSB Settings  Sharing Settings Select Start Run Sharing Mode Guest Network Print ServerArcher C8 AC1750 Wireless Dual Band Gigabit Router Advanced StatusNetwork 1 WAN Note Archer C8 AC1750 Wireless Dual Band Gigabit Router Archer C8 AC1750 Wireless Dual Band Gigabit Router Archer C8 AC1750 Wireless Dual Band Gigabit Router Archer C8 AC1750 Wireless Dual Band Gigabit Router Archer C8 AC1750 Wireless Dual Band Gigabit Router Archer C8 AC1750 Wireless Dual Band Gigabit Router MAC Clone 3 LAN Dual Band Selection Wireless 2.4GHzWireless Settings Archer C8 AC1750 Wireless Dual Band Gigabit Router 2 WPS Use the Wi-Fi Protected Setup Button II. Enter the client device’s PIN on the routerWireless Security Archer C8 AC1750 Wireless Dual Band Gigabit Router  Encryption You can select either Automatic, or Tkip or AES AC1750 Wireless Dual Band Gigabit Router Wireless MAC Filtering 22 Add or Modify Wireless MAC Address Filtering entryTo modify or delete an existing entry Wireless Advanced Wireless Statistics Wireless 5GHz Test 2 WPS Wireless Security Archer C8 AC1750 Wireless Dual Band Gigabit Router  Encryption You can select either Automatic, or Tkip or AES AC1750 Wireless Dual Band Gigabit Router 35 Add or Modify Wireless MAC Address Filtering entry To modify or delete an existing entry Wireless Advanced Wireless Statistics 38 Guest Network Wireless Settings  Access And Bandwidth Control Wireless 5GHz DhcpDhcp Settings Dhcp Clients List Address ReservationTo Reserve an IP address 43 Add or Modify an Address Reservation EntryDevice Settings 46 File Sharing  Sharing Account47 Add or Modify Share Folder 48 Pint Server Setting NAT BoostForwarding Virtual ServersTo setup a virtual server entry 52 Add or Modify a Virtual Server EntryPort Triggering To add a new rule, follow the steps belowArcher C8 AC1750 Wireless Dual Band Gigabit Router To assign a computer or server to be a DMZ server Once the router is configured, the operation is as follows10.3 DMZ UPnP Security Basic SecurityAdvanced Security  Note Local Management 60 Local ManagementRemote Management Parental Control To add a new entry, please follow the steps belowArcher C8 AC1750 Wireless Dual Band Gigabit Router Access Control Rule There are two methods to add a new rule Method One Archer C8 AC1750 Wireless Dual Band Gigabit Router Archer C8 AC1750 Wireless Dual Band Gigabit Router 70 Add Internet Access Control Entry Method TwoHost Archer C8 AC1750 Wireless Dual Band Gigabit Router Target Schedule To add a new schedule, follow the steps below Advanced Routing To add static routing entries Other configurations for the entriesStatic Routing List Bandwidth Control System Routing TableControl Settings Rules ListBinding Settings 16 IP & MAC BindingTo add IP & MAC Binding entries, follow the steps below To find an existing entry, follow the steps belowARP List Comexe.cn Ddns To set up for DDNS, follow these instructionsDynamic DNS Dyndns.org Ddns 18 IPv6 Support 18.1 IPv6 Status DHCPv6 Server18.2 IPv6 Setup DHCPv6 Slaac Static IPv6 PPPoEv6  Get IPv6 Address Way Tunnel 6to4 System Tools Time Settings To set time manuallyTo set Daylight Saving DiagnosticTo set time automatically Archer C8 AC1750 Wireless Dual Band Gigabit Router Firmware Upgrade 106 Diagnostic ResultsFactory Defaults Backup & RestoreReboot Password System LogArcher C8 AC1750 Wireless Dual Band Gigabit Router Statistics Archer C8 AC1750 Wireless Dual Band Gigabit Router Packets Modify ResetStatistics Table IP/MAC Address TotalAppendix a FAQ Figure A-3 MAC Clone Want to use Netmeeting, what do I need to do?Figure A-5 Add or Modify a Virtual server Entry Figure A-7 Basic Security Want to build a WEB Server on the LAN, what should I do?Wireless stations cannot connect to the router Figure A-9 Virtual ServersAppendix B Configuring the PC Install TCP/IP componentVerify the network connection between your PC and the router Figure B-5 Failure result of Ping command Please check the connection following these stepsEnvironmental and Physical WirelessGeneral Appendix D Glossary Archer C8 AC1750 Wireless Dual Band Gigabit Router

Related manuals

Manual 2 pages 19.3 Kb

Manual 146 pages 25.44 Kb