TP-Link AC1750 manual Wireless Statistics

Page 69

Archer C8 AC1750 Wireless Dual Band Gigabit Router

messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates the DTIM Interval is the same as Beacon Interval.

Enable WMM - WMM function can guarantee the packets with high-priority messages being transmitted preferentially. It is strongly recommended.

Enable Short GI - This function is recommended for it will increase the data capacity by reducing the guard interval time.

Enabled AP Isolation - This function can isolate wireless stations on your network from each other. Wireless devices will be able to communicate with the router but not with each other. To use this function, check this box. AP Isolation is disabled by default.

Note:

If you are not familiar with the setting items in this page, it's strongly recommended to keep the provided default values; otherwise it may result in lower wireless network performance.

5.5.6Wireless Statistics

Choose menu “Advanced→Wireless→Wireless Statistics”, you can see the MAC Address, Current Status, Received Packets and Sent Packets for each connected wireless station.

Figure 5-37 Wireless Statistics

MAC Address - The connected wireless station's MAC address

Current Status - The connected wireless station's running status, one of STA-AUTH/

STA-ASSOC/ STA-JOINED/ WPA/ WPA-PSK/ WPA2/ WPA2-PSK/ AP-UP/ AP-DOWN/ Disconnected

Received Packets - Packets received by the station

Sent Packets - Packets sent by the station

You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button.

If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page.

- 58 -

Image 69

Contents Archer C8 Copyright & Trademarks FCC Statement 5150-5250 MHz Country Restriction Reason/remark Country Restriction Reason/remark5470-5725 MHz Country Restriction Reason/remark 5250-5350 MHz Country Restriction Reason/remarkKorea Warning Statements Safety Information Yang Hongliang Product Manager of International Business Product Description AC1750 Wireless Dual Band Gigabit RouterContents Dhcp 100 Package Contents Conventions Overview of the routerMain Features Panel Layout Front PanelName Status Indication Rear Panel  RESET/WPSArcher C8 AC1750 Wireless Dual Band Gigabit Router Installation Environment Requirements Connecting the routerSystem Requirements Hardware Installation Archer C8 Quick SetupDynamic IP WAN Connection TypePPPoE/Russian PPPoE Static IPL2TP Pptp Archer C8 AC1750 Wireless Dual Band Gigabit Router Internet Network MapArcher C8 AC1750 Wireless Dual Band Gigabit Router  Note Archer C8 AC1750 Wireless Dual Band Gigabit Router Archer C8 AC1750 Wireless Dual Band Gigabit Router Wireless USB SettingsFile Sharing Select Start Run  Sharing Settings Sharing Mode Print Server Guest NetworkArcher C8 AC1750 Wireless Dual Band Gigabit Router Status Advanced1 WAN Network Note Archer C8 AC1750 Wireless Dual Band Gigabit Router Archer C8 AC1750 Wireless Dual Band Gigabit Router Archer C8 AC1750 Wireless Dual Band Gigabit Router Archer C8 AC1750 Wireless Dual Band Gigabit Router Archer C8 AC1750 Wireless Dual Band Gigabit Router Archer C8 AC1750 Wireless Dual Band Gigabit Router MAC Clone 3 LAN Wireless 2.4GHz Wireless SettingsDual Band Selection Archer C8 AC1750 Wireless Dual Band Gigabit Router 2 WPS II. Enter the client device’s PIN on the router Use the Wi-Fi Protected Setup ButtonWireless Security Archer C8 AC1750 Wireless Dual Band Gigabit Router  Encryption You can select either Automatic, or Tkip or AES AC1750 Wireless Dual Band Gigabit Router 22 Add or Modify Wireless MAC Address Filtering entry Wireless MAC FilteringTo modify or delete an existing entry Wireless Advanced Wireless Statistics Wireless 5GHz Test 2 WPS Wireless Security Archer C8 AC1750 Wireless Dual Band Gigabit Router  Encryption You can select either Automatic, or Tkip or AES AC1750 Wireless Dual Band Gigabit Router 35 Add or Modify Wireless MAC Address Filtering entry To modify or delete an existing entry Wireless Advanced Wireless Statistics  Access And Bandwidth Control 38 Guest Network Wireless SettingsDhcp  Wireless 5GHzDhcp Settings Address Reservation Dhcp Clients List43 Add or Modify an Address Reservation Entry To Reserve an IP addressDevice Settings  Sharing Account 46 File Sharing47 Add or Modify Share Folder NAT Boost 48 Pint Server SettingVirtual Servers Forwarding52 Add or Modify a Virtual Server Entry To setup a virtual server entryTo add a new rule, follow the steps below Port TriggeringArcher C8 AC1750 Wireless Dual Band Gigabit Router Once the router is configured, the operation is as follows 10.3 DMZTo assign a computer or server to be a DMZ server UPnP Basic Security SecurityAdvanced Security  Note 60 Local Management Local ManagementRemote Management To add a new entry, please follow the steps below Parental ControlArcher C8 AC1750 Wireless Dual Band Gigabit Router Access Control Rule There are two methods to add a new rule Method One Archer C8 AC1750 Wireless Dual Band Gigabit Router Archer C8 AC1750 Wireless Dual Band Gigabit Router Method Two 70 Add Internet Access Control EntryHost Archer C8 AC1750 Wireless Dual Band Gigabit Router Target Schedule To add a new schedule, follow the steps below Advanced Routing Other configurations for the entries Static Routing ListTo add static routing entries System Routing Table Bandwidth ControlRules List Control Settings16 IP & MAC Binding Binding SettingsTo find an existing entry, follow the steps below To add IP & MAC Binding entries, follow the steps belowARP List To set up for DDNS, follow these instructions Dynamic DNSComexe.cn Ddns Dyndns.org Ddns 18 IPv6 Support DHCPv6 Server 18.1 IPv6 Status18.2 IPv6 Setup DHCPv6 Slaac Static IPv6 PPPoEv6  Get IPv6 Address Way Tunnel 6to4 System Tools To set time manually Time SettingsDiagnostic To set time automaticallyTo set Daylight Saving Archer C8 AC1750 Wireless Dual Band Gigabit Router 106 Diagnostic Results Firmware UpgradeBackup & Restore Factory DefaultsReboot System Log PasswordArcher C8 AC1750 Wireless Dual Band Gigabit Router Statistics Archer C8 AC1750 Wireless Dual Band Gigabit Router Statistics Table IP/MAC Address Modify ResetPackets TotalAppendix a FAQ Want to use Netmeeting, what do I need to do? Figure A-3 MAC CloneFigure A-5 Add or Modify a Virtual server Entry Want to build a WEB Server on the LAN, what should I do? Figure A-7 Basic SecurityFigure A-9 Virtual Servers Wireless stations cannot connect to the routerInstall TCP/IP component Appendix B Configuring the PCVerify the network connection between your PC and the router Please check the connection following these steps Figure B-5 Failure result of Ping commandWireless GeneralEnvironmental and Physical Appendix D Glossary Archer C8 AC1750 Wireless Dual Band Gigabit Router

Related manuals

Manual 2 pages 19.3 Kb

Manual 146 pages 25.44 Kb