Archer C8
AC1750 Wireless Dual Band Gigabit Router
5.14.1Static Routing List
Choose menu “Advanced→Advanced Routing→Static Routing List”, and then you can configure the static route in the next screen (shown in Figure
Figure 5-80 Static Routing
To add static routing entries:
1.Click Add New… shown in Figure
Figure 5-81 Add or Modify a Static Route Entry
2.Enter the following data:
Destination Network - The Destination Network is the address of the network or host that you want to assign to a static route.
Subnet Mask - The Subnet Mask determines which portion of an IP Address is the network portion, and which portion is the host portion.
Default Gateway - This is the IP Address of the gateway device that allows for contact between the router and the network or host.
3.Select Enabled or Disabled for this entry on the Status drop-down list.
4.Click the Save button to make the entry take effect.
Other configurations for the entries:
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
- 93 -