ZyXEL | VES-1616/24FA-5x Series Support Notes |
In the Add Network Traffic Class Rule page, we can give each rule a name for easy identification, for example PPPoE-1, PPPoE-2, IP, ARP and VoIP. Assign the order for each rule and check the Enable option to make sure this rule is enabled. We need to define that this kind of traffic will be sent through a specific WAN interface, in other words, that it would be added the VLAN ID when sent through this WAN Interface, and that is why we enable the VLAN Mux. For example, the PPPoE-1 and PPPoE-2 need to be added the VLAN ID 203, we select the WAN interface which will add the VLAN ID 203 for these two rules. Scroll down the page to configure the other parameters.
On this page, there are two sets of the traffic parameters used to define the traffic. In the section of SET-1, we can base on the layer 3 parameters and SET-2 is the protocol type. In this case, we will use protocol type to class PPPoE and IPoE (IP and ARP). There are two types of protocols for PPPoE (8863 and 8864); the Hex
All contents copyright 2008 ZyXEL Communications Corporation. | 86 |