ZyXEL |
4.Click OK.
5.Click OK again to start the configuration reset process.
6.Please note that the IP address of the switch is now 192.168.1.1.
Using the Console Port:
1.Connect to the console port and open the Terminal Emulation Software.
2.Enter the administrator login password to log into the CLI. Enter “erase run” to load the factory default configuration.
General Networking
DHCP Relay Option 82 Application
ISP may want to limit the number of IP address or provide some specific client IP addresses based on the switch ports, VLAN ID and option 82 string.
They can easily achieve this with the DHCP Relay Option 82 feature and a DHCP server that supports Option 82.
The following figure shows a network example.
All contents copyright 2008 ZyXEL Communications Corporation. | 8 |