ZyXEL | VES-1616/24FA-5x Series Support Notes |
VES-1616FA-54(config-vlan)# fixed 1
Step 4: On the VES-1616FA-54, in the configure mode, create VLAN 40, and set the port 2 to be fixed port.
VES-1616FA-54(config)# vlan 40 VES-1616FA-54(config-vlan)# untagged 2 VES-1616FA-54(config-vlan)# fixed 2
Step 5: On the VES-1616FA-54, in the configure mode, create VLAN 50, and set the port 3 to be fixed port.
VES-1616FA-54(config)# vlan 50 VES-1616FA-54(config-vlan)# untagged 3 VES-1616FA-54(config-vlan)# fixed 3
Step 6: On the VES-1616FA-54, set the PVID of specific VLAN 30 VES-1616FA-54(config)# interface port-channel 1 VES-1616FA-54(config-interface)# pvid 30 VES-1616FA-54(config-interface)# exit
Step 7: On the VES-1616FA-54, set the PVID of specific VLAN 40 VES-1616FA-54(config)# interface port-channel 2 VES-1616FA-54(config-interface)# pvid 40 VES-1616FA-54(config-interface)# exit
Step 8: On the VES-1616FA-54, set the PVID of specific VLAN 50 VES-1616FA-54(config)# interface port-channel 3 VES-1616FA-54(config-interface)# pvid 50 VES-1616FA-54(config-interface)# exit
Step 9: On the VES-1616FA-54, in the configure mode, enable IGMP snooping
VES-1616FA-54(config)#igmpsnooping
Step 10: On the VES-1616F-3X, in the configure mode, create MVR VES-1616FA-54(config)# mvr 100
Step 11: Define the Dynamic mode VES-1616FA-54(config-mvr)# mode dynamic
Step 12: on the VES-1616FA-54, in the MVR 100, set up the multicast group address.
VES-1616FA-54(config-mvr)# group test start-address 233.1.1.1 end-address 233.1.1.100
Step 13: In the MVR 100, specify receiver ports on port 1~3 as untagged ports
VES-1616FA-54(config-mvr)# receiver-port 1-3 VES-1616FA-54(config-mvr)# untagged 1-3
Step 14: Then, specify the source port 17 and assign it to be tagged ports VES-1616FA-54(config-mvr)#source-port 17 VES-1616FA-54(config-mvr)# tagged 17