Kramer Electronics VS-66hdcp user manual Connecting the VS-66HDCP 6 x 6 DVI Matrix Switcher

Connecting the VS-66HDCP 6 x 6 DVI Matrix Switcher

6Connecting the VS-66HDCP 6 x 6 DVI Matrix Switcher

To connect the VS-66HDCP, as the example in Figure 2 illustrates, do the following1:

1.Connect up to six DVI sources2 (for example, computer graphics sources) to the SELECT IN DVI connectors.

2.Connect the SELECT OUT DVI connectors to up to six DVI acceptors3 (for example, DVI displays).

3.If required, connect a PC and/or controller to the RS-232 port (see section 7.5) and/or the ETHERNET port (see section 7.6).

4.Connect the power cord (not shown in Figure 2).

5.If required, acquire the EDID (see section 7.4).

1 Switch OFF the power on each device before connecting it to your VS-66HDCP. After connecting your VS-66HDCP, switch on its power and then switch on the power on each device

2 You do not have to connect all the sources 3 You do not have to connect all outputs

9