Technical Specifications
7.6.2Connecting the ETHERNET Port via a Network Hub
You can connect the Ethernet port of the
7.6.3Control Configuration via the Ethernet Port
To control several units via the Ethernet, connect the Master unit (Machine # 1) via the Ethernet port to the LAN port of your PC. Use your PC initially to configure the settings (see section 7.6).
8Technical Specifications
The VS-66HDCP technical specifications are shown in Table 3:
| Table 3: | |
|
|
|
INPUTS: |
| 6 DVI connectors |
OUTPUTS: |
| 6 DVI connectors |
BANDWIDTH: |
| Supports up to 1.65Gbps bandwidth per graphic channel |
COMPLIANCE WITH |
| Supports DVI 1.1 and HDCP |
STANDARDS: |
|
|
MAX RESOLUTION: |
| Up to UXGA; 1080p, 1920 x 1200 |
POWER SOURCE: |
| 100−240VAC; 50/60Hz, 32VA |
CONTROLS: |
| Front panel buttons, Infrared remote control transmitter, |
DIMENSIONS: |
| 19" x 9.4" x 1U W, D, H |
WEIGHT: |
| 2.5kg (5.5lbs) approx. |
ACCESSORIES: |
| Power cord, IR transmitter |
OPTIONS: |
| Kramer cables2; external remote IR receiver cable |
1 Specifications are subject to change without notice
2 For best results, use Kramer cables the such as the
16 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |