Operating the VS-66HDCP 6 x 6 DVI Matrix Switcher
4.Press the SELECT IN button to which the first EDID will be copied (for example, IN 1).
The selected input number flashes on the display.
5.Press the SELECT OUT button from which the first EDID will be acquired (for example, OUT 1).
6.Press the SELECT IN 1 button again. The IN 1 button ceases to flash.
7.Press another SELECT IN to which the next EDID will be copied (for example, IN 3).
The selected input number flashes on the display.
8.Press the SELECT OUT button from which the next EDID will be acquired (for example, OUT 6).
9.Press the SELECT IN 3 button again. The IN 3 button ceases to flash.
10.Press the SELECT IN buttons to which you want to copy the EDID (for example, IN 1 and IN 3).
11.Make sure that the relevant input numbers flash on the display.
12.Press the EDID button.
The process is complete when the display returns to normal.
7.4.3Acquiring an EDID from Several Connected Outputs Automatically
To automatically acquire or change the EDID of several output displays1:
1.Turn ON the
2.Connect the required acceptors to the outputs from which you want to acquire the EDID.
3.Press the EDID and STO buttons simultaneously and hold them for 3 seconds.
Both buttons flash.
4.Press the SELECT IN button to which the EDID will be copied. The selected input number flashes on the display.
5.Press the OFF button until a
6.Press the EDID button.
The process is complete when the display returns to normal.
1 The EDID acquired is a weighted average of all the connected outputs. For example, if several displays with different resolutions are connected to the outputs, the acquired EDID supports all the resolutions, as well as other parameters included in the EDID
13