Kramer Electronics FC-1ETHN instruction

Using the Kramer Configuration Manager Software

5 Using the Kramer Configuration Manager Software

This section describes:

•How to install and run the Configuration Manager software, see section 5.1

•The Configuration Manager Window features, see section 5.2

5.1Installing and Running the Kramer Configuration Manager Software

To install the Kramer Configuration Manager software:

•Insert the CD-ROM in the CD-ROM drive, double click the Setup.exe file and follow the on-screen instructions

To run the Kramer Configuration Manager software (for the first time):

1.Click the appropriate shortcut in the Start menu’s Programs folder. The Choose Port window appears as follows:

Figure 2: Choose Port Window

2.Choose the LAN port for configuration via Ethernet, or the appropriate COM port for configuration via serial cable (see section 6.1) and click OK. The FC-1ETHNConfiguration Manager window (see Figure 3) opens.

To run the Kramer Configuration Manager software (subsequently):

•Click the appropriate shortcut in the Start menu’s Programs folder. The FC-1ETHNConfiguration Manager window (see Figure 3) opens

5.2Understanding the Kramer Configuration Manager Window

Figure 3 and Table 3 define the FC-1ETHNConfiguration Manager window:

4	KRAMER ELECTRONICS, LTD.