Controlling Kramer Machines via Ethernet using the FC-1ETHN
6.3.2Master Routing Mode
In the Master Routing Mode, the FC-1ETHNdoes not wait for the remote station to send the data first, and routes the data in the destination device direction as soon as there is data to be sent. The data is always sent to a specific destination (as defined by the Destination IP address and Destination Data Port Number Settings of the FC-1ETHN). Also, the FC-1ETHNonly accepts the data sent from the remote station whose IP address matches the one set in the Destination IP address. The FC-1ETHNwill discard the data sent from any other IP. See the example illustrated in Figure 5:
Figure 5: Connecting the FC-1ETHN in the Master Routing Mode
7 Controlling Kramer Machines via Ethernet using the FC-1ETHN
You can use your FC-1ETHNto control a Kramer machine from computers that connect to a LAN1 (see section 7.1) or via a controller1 (see section 7.2).
1 As well as via an Internet connection
10 | KRAMER ELECTRONICS, LTD. |
