Kramer Electronics VP-81SIDN user manual Authorized Users, Step-In Software Menu Bar

9.1.1Authorized Users

By default, you are logged in as User and you can:

∙Select an active input or output

∙Adjust or mute/unmute the output volume

∙Change the device name

∙Modify the IP configuration

Options that you are not authorized to perform are grayed out.

When logged in as Admin, in addition to the User abilities, you can:

∙Modify the input priorities (see Section 9.1.9)

∙Modify the input/output button characteristics (see Section 9.1.10)

∙Upgrade the device firmware (see Section 9.1.11)

∙Reset the device (see Section 9.1.12)

∙Change the User and Admin Passwords (see Section 9.1.12)

∙Enable/disable IR control

Note: Any actions that you are not authorized to perform are grayed out.

9.1.2The Step-In Software Menu Bar

The following table describes the Menu Bar options.

		Menu Bar	Sub Menu	Description
		Options
	FILE		Connect/Disconnect	Connect or disconnect to the device
			Exit	Exit the Step-in software
	DEVICE		Details	Retrieve and display the device details, such as, model,
				unit name, version, and so on
			Change Admin Password	Change the Admin password
			Cascade	Select the number of cascaded devices
			Firmware Update	Update the device firmware using a new firmware file
				(Admin only)
			Change Unit Password	Change the Admin user password (Admin only)
			Reset	Power cycle the device (Admin only)
			IR Status	Enable or disable the IR control for the device
	ABOUT		NA	Displays the Step-in Software and Kramer company
				details
VP-81SIDN - Operating the VP-81SIDN Remotely					29