Figure 15: Connection Method Window
2.Select the connection method (via Ethernet over a LAN or a serial connection) by clicking the relevant radio button.
3.For Ethernet, enter the IP address and Port number of the device and click Connect.
To set the default IP address and Port number, press the Default button.
4.For a serial connection, select the required Com port from the
5.Click Connect.
If the connection is successful, the window shown in Figure 10 appears. If the connection is not successful, a Timeout error message appears.
9.1.5Switching an Input to an Output
To switch an input to an output:
1.Click on the required
The input is selected and the button changes to solid purple as shown in Figure 16.
31 | |
|
|