Lindy iSWITCH user manual ID Address Configuration and Identification, Name

Page 36

13.

a. ID Address Configuration and Identification:

Since 16 iSWITCHs can be daisy chained together to share one CIC, each unit can be individually named.

b. Name:

The name of each outlet can be labeled to whatever you like it to be called (i.e. server1, DSL modem or webserver1).

c.Power Resume Delay: The power resume delay is convenient for sequential startup.

d.Ring On/Reset:

Each outlet can be individually programmed to enable ring On/Off or reset. And phone control. (Optional, see P.47)

e:Safe Shutdown/Reboot: The safe shutdown feature has a configurable delay time to safely shutdown the NT server. To enable this safe shutdown function, in both NT and WIN 2000, you need to have three setting for the UPS to configure it.

Connect the communication port on the rear of iSWITCH to NT or WIN 2000 server with the PC Communication cable. Connect the corresponding outlet on the rear of iSWITCH to the NT or WIN 2000 server with the PC input power cord. Check the corresponding box of safe waiting device shutdown in iSWITCH configuration page to enable this function.

36

Image 36
Contents EPowerSwitch Table of Contents Trademarks Quick Install Procedure ISwitch-Front Panel ISwitch-Rear Panel ISwitch Features IntroductionSetup Procedure Setup via the USB Port Requires Windows 98 or higherPage Page Page Page Page Page Page Page Setup via the Serial Port Page Page Page Page Page Setup via the Ethernet Port Page Telnet Configuration Page Page Page Page Web-Based Configuration Page ISP Mode PPP Mode Page Page ISwitch ID Address Configuration and Identification NamePage Page Page Firmware Upgrade Procedures Page Page Page Firmware upgrade is complete Telephone Access Interface Daisy Chaining Page Problem SolutionAppendix Value Purpose Subnet maskingSubnetting and Subnet Masks Subnet Mask Routing and FilteringAgent Dry ClosureInput Dry Closure OutputObtaining Technical Assistance