10.Open the Settings Tab. Function, arrow and ctrl keys act as: Terminal Keys, Backspace key sends: Crtl+H, Emulation: VT100, Telnet terminal: VT100, Backscroll buffer lines: 500. Click OK.
11.Plug the iSwitch’s power cord into the AC outlet and turn the iSwitch on.
12.When the message “Press ‘/’ key within 5 seconds to enter console configuration” appears press the forward slash key (/) within the 5 seconds or the iSwitch will time out and then you have to start over.
13.Next you will be asked for the User Password. The default password is admin. Enter the password, then hit enter.
19