IOGear GNS1000 user manual Check Your PC Windows only

Page 16

Installation

4.Connect the included power adapter to the power socket on the BOSS™ and then plug the power adapter into a wall outlet.

5.Turn on the BOSS™.

If the link LED of the WAN port is not ON, switch the WAN MDI/MDIX switch to the alternate setting. The hardware installation is now complete.

2.2Check Your PC (Windows only)

Do not assign an IP address to your computer.

Please check the following settings on your computer:

1.Please select sequentially: Start menu -> Settings -> Control panel -> Network connections ->

Local Area Connection. Then a “Local Area Connection Status” window shows up.Figure( 2.2a)

2.Click the Properties button in Local Area Connection Status. Then the “Local Area Connection Properties” window appears (Figure 2.2b).

3.Select Internet protocol (TCP/IP) item and then click the Properties button. The “Internet Protocol (TCP/IP) Properties” window appears (Figure 2.2c).

Select the “Obtain an IP address automatically” radio button, then click the OK button.

14

Image 16

Contents Page Page Table of Contents Table of Contents Table of Contents Package Content and System Requirements This package contains System RequirementsOverview Features Benefits and Key Features Easy InstallationVirtual Private Network VPN SPI FirewallDynamic Domain Name Service DNS Auto Switching of Cable TypeNetwork Attached Storage FTP Server Pictorial Introduction Front ViewBack View WAN MDI/MDIX Switch Reset ButtonWAN Port LAN PortsInstallation Hardware InstallationCheck Your PC Windows only Installation Connecting to the Web-Based Manager Password. .3aInstallation Web-Based Manager Basic Settings Installation How the Router Works Internal Network InterfaceInstallation Domain Name Server External Network Interface Example 1 Fixed IP Address Settings Example 2 Dhcp Client ADSL/PPPoE Setting Enter the User Name and Password Example 3 Adsl ConnectionADSL/PPTP Client Setting Configuration Hierarchies Power Management Configuration HierarchiesOverview of Configuration Menu Power Management Power DownWake On LAN WOL Hard Disk StandbyNetwork Settings To Configure Your Network SettingsDhcp Server Settings To Disable the Dhcp Server Address to each device connected to the LAN port of BossIP Alias Multiple NAT Route Settings Ddns Network Settings Firewall Settings Setting up your FirewallFirewall Settings URL Filter Setup IP Filter Setup Denial of Service VPN Settings How to change your VPN settingsIPSec Settings VPN Settings 1a,b,c Pptp Settings User Management Manage Your Network UsersUser Group User Management NAS Management Setting Up Your BossHD Initialization Wizard NAS Management Advanced Enter the Workgroup Name and Computer DescriptionFor Unix-like Platform Users File Sharing NAS Management NAS Management System Management Instruction to Boss ManagementSystem Management Event Report Settings Firmware Update Current firmware version is shown asTime Settings Snmp Agent fieldSystem Reports Generating System ReportsSystem Reports System Log URL Log Dhcp Lease Report Care & Handling TroubleShooting Basic TroubleShootingSeagate Trouble Shooting Tip Contacting Iogear Service SupportTechnical Support Default Setting Table AppendixPower Button Description of LEDs Status MeaningSpecifications Product SpecificationsRadio & TV Interference Statement Limited Warranty Page Contact info