Installation
According to the default settings, we will assign the LAN to network “192.168.2.1” You can add more detailed configurations later in section 4.1 DHCP Server settings.
For the Network Address Translation (NAT) application, the private network address should be set in the following address range reserved by the Internet Assigned Numbers Authority (IANA).
All BOSS™ default settings will appear within the window referenced on page 18. The settings should match those listed in the table below.
Within the Basic Settings window, you may choose another Server Appliance Name, Server Appliance
IP Address, and LAN Netmask. Please enter any new information at this time. We recommend that you change the name only and keep the rest of the default settings.
21