IOGear GNS1000 user manual VPN Settings

Page 48

VPN Settings

9.In Remote Host Setting: If the remote computer has a fixed IP address (e.g. 10.0.0.9). Please select the Fixed IP radio button.

10.Enter the remote computer’s IP address within the Remote IP field. (e.g. 10.0.0.9)

11.Enter the remote computer’s Subnet. (e.g. 172.17.0.0)

12.Enter the Remote Netmask of the remote computers. (e.g. 255.255.0.0)

13.Now click the Apply button.

14.Please check the IPsec Tunnel List. In the Action column, click the link up button to connect immediately, or click the remove button to remove the tunnel.

Remote Settings:

Please repeat the steps above to create the tunnel. Note in step 9, the Remote IP field, enter the fixed IP address of the main company and the correspond- ing Subnet and Netmask.

Preshare Key:

The Preshare Key field is a secret key that is used to identify the communicating host during the phase 1 IKE negotiation. It is also used idenfity the users, much like a password. Simply enter a string of text (i.e. isakmpkey) into the Preshare key field on both computers. Each computer will share the same preshare key. The IPSec Key Lifetime specifies how long the secret key will be exchanged. If zero value is given, it will pick up the default setting. For the Re- mote Host Setting, you can choose the remote type of communication for a fixed IP gateway or a dy- namic IP gateway.

The IPSec Tunnel List displays information for each tunnel that you build.

46

Image 48
Contents Page Page Table of Contents Table of Contents Table of Contents Package Content and System Requirements This package contains System RequirementsOverview Features Benefits and Key Features Easy InstallationVirtual Private Network VPN SPI FirewallAuto Switching of Cable Type Dynamic Domain Name Service DNSNetwork Attached Storage FTP Server Pictorial Introduction Front ViewBack View WAN MDI/MDIX Switch Reset ButtonWAN Port LAN PortsInstallation Hardware InstallationCheck Your PC Windows only Installation Connecting to the Web-Based Manager Password. .3aInstallation Web-Based Manager Basic Settings Installation How the Router Works Internal Network InterfaceInstallation Domain Name Server External Network Interface Example 1 Fixed IP Address Settings Example 2 Dhcp Client ADSL/PPPoE Setting Enter the User Name and Password Example 3 Adsl ConnectionADSL/PPTP Client Setting Configuration Hierarchies Configuration Hierarchies Power ManagementOverview of Configuration Menu Power Management Power DownWake On LAN WOL Hard Disk StandbyNetwork Settings To Configure Your Network SettingsDhcp Server Settings To Disable the Dhcp Server Address to each device connected to the LAN port of BossIP Alias Multiple NAT Route Settings Ddns Network Settings Firewall Settings Setting up your FirewallFirewall Settings URL Filter Setup IP Filter Setup Denial of Service VPN Settings How to change your VPN settingsIPSec Settings VPN Settings 1a,b,c Pptp Settings User Management Manage Your Network UsersUser Group User Management Setting Up Your Boss NAS ManagementHD Initialization Wizard NAS Management Advanced Enter the Workgroup Name and Computer DescriptionFor Unix-like Platform Users File Sharing NAS Management NAS Management System Management Instruction to Boss ManagementSystem Management Event Report Settings Firmware Update Current firmware version is shown asTime Settings Snmp Agent fieldSystem Reports Generating System ReportsSystem Reports System Log URL Log Dhcp Lease Report Care & Handling TroubleShooting Basic TroubleShootingSeagate Trouble Shooting Tip Contacting Iogear Service SupportTechnical Support Default Setting Table AppendixPower Button Description of LEDs Status MeaningSpecifications Product SpecificationsRadio & TV Interference Statement Limited Warranty Page Contact info