System Management
1.New Password: The administrator can change the administrator password here. Please enter the new password you would like to change to. Note that you must fill the new password in both Password change and Password confirmation fields. If both fields are not the same, the page will not be submitted.
2.FTP Server: Please select the Enable radio button to establish the FTP server, or select the disable radio button to turn off the FTP feature.
3.Confirm New Password: Please enter the new password again.
4.External Admin.: This feature allows administrators to access the web based configuration menu from the Internet. The default setting for this feature is disabled for security reasons.
5.External Admin. Port: Defines a port for the remote administrator to connect to.
6.Restart device: This function reboots the Network Server Appliance. Select the Enable radio button to restart BOSS™. The default setting of the function is disabled.
7.Clear event log: This function is used to clean the system history that is listed in Event Report (section 8.2). If you choose the No radio button, the event record never clears, even when you reboot the system.
8.Clear DHCP lease: This function is used to clean the DHCP Lease record listed in section 8.4. Please choose the Yes radio button to clean the DHCP lease report.
9.Restore Factory default: To recover the factory settings, please choose the Yes radio button and the factory defaults will be loaded. Click the Apply button.
61