KTI Networks KS-220F/S-A, KS-220F/S-3, KS-220F/C, KS-220F/S-5, KS-220F/T manual

Page 2

1999 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any directive work (such as translation or transforma- tion) without permission from KTI Networks Inc.

KTI Networks Inc. reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of KTI Networks Inc. to provide notification of such revision or change.

For more information, contact:

United States KTI Networks Inc.

P.O. BOX 631008

Houston, Texas 77263-1008

Phone: 713-2663891

Fax: 713-2663893

E-mail: kti@ktinet.com

Web: http://www.ktinet.com/

International Fax: 886-2-26983873 E-mail: kti@ktinet.com.tw

Web: http://www.ktinet.com.tw/

Image 2
Contents Installation Guide 10/100 Bridging ConverterPage Trademarks Interpreting LED Indicators Table of Contents IntroductionInstallation Making Network ConnectionsIntroduction Features Standard SpecificationsConnectors Port 1 2 RJ-45 jacks FX LED for PortInstallation guide Unit One AC power adapter for the switch InstallationInstallation UnpackingChecking AC Power Two switched ports are located on the front panel Two Switched PortsConfiguration Switches Factory DefaultsJack Function TP PortsImportant Note Pin assignments of the jacks are defined as followsCompliant UTP Cables Connected Device SW1 setting Port Operation ModeUTP Connections Connection UTP Cable Type Maximum LengthModel Series Fiber Port and Fiber ConnectionFiber Cables Required fiber cable for the connection are Applications Following table lists some applications using the deviceConnecting to Duplex type Maximum length Connected device Duplex type Maximum lengthInterpreting LED Indicators Following figure shows the locations of the LED indicators