KTI Networks KS-220F/C, KS-220F/S-A, KS-220F/S-3, KS-220F/S-5, KS-220F/T manual Checking AC Power

Page 9

Checking AC Power

One AC power adapter is contained in the product package. Before you begin the installation, check the AC voltage of your area. The AC power adapter which is used to supply the DC power for the unit should have the AC voltage matching the commercial power voltage in your area.

The specifications of the AC power adapter are:

•AC input power: AC power voltage of your area

•DC output power:+12 VDC 800mA min.

• DC plug type:

The power socket for the AC power adapter is located on the rear of the unit as shown below:

-5-

Image 9

Contents 10/100 Bridging Converter Installation GuidePage Trademarks Installation Table of Contents IntroductionInterpreting LED Indicators Making Network ConnectionsIntroduction Features Connectors Port 1 2 RJ-45 jacks SpecificationsStandard FX LED for PortInstallation InstallationInstallation guide Unit One AC power adapter for the switch UnpackingChecking AC Power Configuration Switches Two Switched PortsTwo switched ports are located on the front panel Factory DefaultsImportant Note TP PortsJack Function Pin assignments of the jacks are defined as followsUTP Connections Connected Device SW1 setting Port Operation ModeCompliant UTP Cables Connection UTP Cable Type Maximum LengthFiber Port and Fiber Connection Fiber Cables Required fiber cable for the connection areModel Series Connecting to Duplex type Maximum length Following table lists some applications using the deviceApplications Connected device Duplex type Maximum lengthFollowing figure shows the locations of the LED indicators Interpreting LED Indicators