KTI Networks KS-220F/S-3, KS-220F/S-A Specifications, Standard, Connectors Port 1 2 RJ-45 jacks

Page 7

Specifications

Standard:	10BASE-T, 100BASE-TX, and 100BASE-FX
Connectors:	Port 1 - 2 RJ-45 jacks
	Port 2 - 2 RJ-45 jacks and 1 fiber connector
Cables:	10BASE-T - Cat. 3, 4, or 5 UTP cable
	100BASE-TX - Cat 5 UTP cable
	100BASE-FX - 62.5/125∝ m MM fiber
	100BASE-FX - 9/125∝ m SM fiber
LED indicators:	Link/Activity LED per port, Duplex/Collision
	LED per port, Speed LED per port, Power LED
	FX LED for Port 2

Filtering address: 1K MAC addresses shared by two ports

Filtering rate:	14,880 pps for 10M Ethernet
	148,800 pps for 100M Fast Ethernet
Forwarding rate: 14,880 pps for 10M Ethernet
	148,800 pps for 100M Fast Ethernet
Power:	+12VDC 800mA min.
Dimension:	144mm x 100mm x 26mm (WxDxH)
Temperature:	0o to 40oC when operating
Humidity:	10% to 90% non-condensing when operating

-3-

Image 7

Contents 10/100 Bridging Converter Installation GuidePage Trademarks Making Network Connections Table of Contents IntroductionInstallation Interpreting LED IndicatorsIntroduction Features FX LED for Port SpecificationsConnectors Port 1 2 RJ-45 jacks StandardUnpacking InstallationInstallation Installation guide Unit One AC power adapter for the switchChecking AC Power Factory Defaults Two Switched PortsConfiguration Switches Two switched ports are located on the front panelPin assignments of the jacks are defined as follows TP PortsImportant Note Jack FunctionConnection UTP Cable Type Maximum Length Connected Device SW1 setting Port Operation ModeUTP Connections Compliant UTP CablesFiber Cables Required fiber cable for the connection are Fiber Port and Fiber ConnectionModel Series Connected device Duplex type Maximum length Following table lists some applications using the deviceConnecting to Duplex type Maximum length ApplicationsFollowing figure shows the locations of the LED indicators Interpreting LED Indicators