Peavey Penta Tube Amplifier owner manual

Page 12

Tube Amplifier

SPECIFICATIONS

Tube Complement:

Four matched EL34 tubes

Four 12AX7/ECC83 tubes

Rated Power and Load:

140 W (rms) into 16, 8 & 4 ohm

External jacks are paralleled - 4 ohms minimum

The following specs are measured @ 1 kHz with the controls preset as follows: Bass, Treble & Mid EQ @ 5

Master Volume @ 1O

(Nominal levels are with Pre Gain @ 5. Minimum levels are with Pre Gain @ 10.)

Preamp Input Section (1st channel):

Nominal Input Level: 0 dBV, 1V RMS

Minimum Input Level: -20 dBV, 100 mV RMS

Maximum Input Level: 6 dBV, 2V RMS

System Signal-to-Noise:

(1st channel - 20 Hz to 20 kHz unweighted) (Pre Gain set halfway)

Greater than 80 dB below rated power

Equalization:

Custom Bass, Mid, & Treble passive type EQ for each mode

Remote Footswitch (included):

Heavy duty 1-button footswitch

Power consumption:

Domestic: 300 watts, 60 Hz, 120 VAC

Export: 300 watts, 50/60 Hz, 220-230/240 VAC

Dimensions:

17.875" H x 21.375" W x 10.25" D (45.40 cm x 54.29 cm x 26.03 cm)

Weight:

57.8 lbs. (26.24 kg) with power supply

Specifications subject to change without notice.

12

Image 12
Contents Page Page Important Safety Instructions Bewahren SIE Diese Sicherheitshinweise AUF Gardez CES Instructions Guarde Estas Instrucciones English Tube AmplifierFront Panel Power StandbyRear Panel-Domestic Footswitch Export 220-230/240 VAC 50/60 Hz only Rear Panel-ExportVoltage Selector Line Cord 230 V units onlyTube Amplifier Deutsch RöhrenverstärkerVorderseite High-Gain-EingangLow-Gain-Eingang Standby Rückseite USA FußschalterLautsprecherausgänge ImpedanzwahlschalterRückseite Export Fußschalter Export NUR 220-230/240 VAC 50/60 HzSpannungswahlschalter Netzkabel nur für Produkte mit 230 VRöhrenverstärker Amplificateur à lampes CaractéristiquesPanneau Avant Standby Paneau arrière US Panneau arrière domestique Pédalier de contrôle 220-230/240 VAC 50/60 Hz seulementSélecteur de votage Amplificateur à lampes Español Amplificador a válvulasPanel Frontal Alimentación Panel Trasero-Doméstico Panel Trasero-Exportado Selector de VoltajeCable de Alimentación sólo en unidades de 230 V Amplificador a válvulas Peavey Electronics Corporation Limited Warranty 80305325

Penta Tube Amplifier specifications

The Peavey Penta Tube Amplifier epitomizes versatility and power in the realm of modern guitar amplification. Designed for both professional musicians and passionate hobbyists, this amp offers a unique blend of classic tube warmth and cutting-edge technology, making it an ideal choice for diverse musical styles.

At the heart of the Penta is its all-tube design, featuring a robust combination of preamp and power tubes that deliver a rich, dynamic sound. Musicians often praise the tonal depth and clarity achieved through the 12AX7 preamp tubes and the EL34 power tubes, which provide a signature punch and sustain that enhances both rhythm and lead passages.

One of the standout features of the Peavey Penta is its extensive EQ section. With multiple channels, each equipped with independent bass, mid, and treble controls, players have the freedom to sculpt their sound precisely to their liking. The amp also includes additional options such as reverb and presence controls, allowing for enhanced spatial effects that complement any playing style.

Additionally, the Penta Tube Amplifier incorporates Peavey’s innovative ‘Power Scaling’ technology. This feature enables musicians to achieve the desired tonal characteristics at lower volumes, making it perfect for practice sessions or smaller venues. By adjusting the power output, players can maintain the richness of their tone without overwhelming their surroundings.

Another significant characteristic of the Penta is its built-in effects loop, which gives users the flexibility to integrate their favorite pedals and outboard gear seamlessly. This ensures that external effects can be utilized without sacrificing the integrity of the amplifier’s inherent sound quality.

Durability and reliability are hallmarks of the Peavey brand, and the Penta is no exception. Built with high-quality components and a rugged chassis, it is engineered to withstand the rigors of live performances and touring.

In summary, the Peavey Penta Tube Amplifier offers a compelling blend of traditional tube amp characteristics and modern technological advancements. With its robust tonal options, powerful scalability, and dependable construction, it stands as an impressive choice for any guitarist looking to elevate their sound. Whether you're performing live or writing in the studio, the Penta's rich tone and flexibility make it a prized addition to any musician's arsenal.