Peavey Penta Tube Amplifier owner manual Important Safety Instructions

Page 3

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using electrical products, basic cautions should always be followed, including the following:

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any of the ventilation openings. Install in accordance with manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point they exit from the apparatus.

11.Only use attachments/accessories provided by the manufacturer.

12.Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a

cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Never break off the ground pin. Write for our free booklet “Shock Hazard and Grounding.” Connect only to a power supply of the type marked on the unit adjacent to the power supply cord.

16.If this product is to be mounted in an equipment rack, rear support should be provided.

17.Note for UK only: If the colors of the wires in the mains lead of this unit do not correspond with the terminals in your plug‚ proceed as follows:

a)The wire that is colored green and yellow must be connected to the terminal that is marked by the letter E‚ the earth symbol‚ colored green or colored green and yellow.

b)The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black.

c)The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red.

18.This electrical apparatus should not be exposed to dripping or splashing and care should be taken not to place objects containing liquids, such as vases, upon the apparatus.

19.Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in suscep- tibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures:

Duration Per Day In Hours

Sound Level dBA, Slow Response

8

90

6

92

4

95

3

97

2

100

1 1⁄2

102

1

105

1⁄2

110

1⁄4 or less

115

According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Ear plugs or protectors to the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss, if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.

SAVE THESE INSTRUCTIONS!

3

Image 3
Contents Page Page Important Safety Instructions Bewahren SIE Diese Sicherheitshinweise AUF Gardez CES Instructions Guarde Estas Instrucciones Tube Amplifier EnglishFront Panel Standby PowerRear Panel-Domestic Line Cord 230 V units only Footswitch Export 220-230/240 VAC 50/60 Hz onlyRear Panel-Export Voltage SelectorTube Amplifier Röhrenverstärker DeutschVorderseite High-Gain-EingangLow-Gain-Eingang Standby Impedanzwahlschalter Rückseite USAFußschalter LautsprecherausgängeNetzkabel nur für Produkte mit 230 V Rückseite ExportFußschalter Export NUR 220-230/240 VAC 50/60 Hz SpannungswahlschalterRöhrenverstärker Caractéristiques Amplificateur à lampesPanneau Avant Standby Paneau arrière US Panneau arrière domestique Pédalier de contrôle 220-230/240 VAC 50/60 Hz seulementSélecteur de votage Amplificateur à lampes Amplificador a válvulas EspañolPanel Frontal Alimentación Panel Trasero-Doméstico Panel Trasero-Exportado Selector de VoltajeCable de Alimentación sólo en unidades de 230 V Amplificador a válvulas Peavey Electronics Corporation Limited Warranty 80305325

Penta Tube Amplifier specifications

The Peavey Penta Tube Amplifier epitomizes versatility and power in the realm of modern guitar amplification. Designed for both professional musicians and passionate hobbyists, this amp offers a unique blend of classic tube warmth and cutting-edge technology, making it an ideal choice for diverse musical styles.

At the heart of the Penta is its all-tube design, featuring a robust combination of preamp and power tubes that deliver a rich, dynamic sound. Musicians often praise the tonal depth and clarity achieved through the 12AX7 preamp tubes and the EL34 power tubes, which provide a signature punch and sustain that enhances both rhythm and lead passages.

One of the standout features of the Peavey Penta is its extensive EQ section. With multiple channels, each equipped with independent bass, mid, and treble controls, players have the freedom to sculpt their sound precisely to their liking. The amp also includes additional options such as reverb and presence controls, allowing for enhanced spatial effects that complement any playing style.

Additionally, the Penta Tube Amplifier incorporates Peavey’s innovative ‘Power Scaling’ technology. This feature enables musicians to achieve the desired tonal characteristics at lower volumes, making it perfect for practice sessions or smaller venues. By adjusting the power output, players can maintain the richness of their tone without overwhelming their surroundings.

Another significant characteristic of the Penta is its built-in effects loop, which gives users the flexibility to integrate their favorite pedals and outboard gear seamlessly. This ensures that external effects can be utilized without sacrificing the integrity of the amplifier’s inherent sound quality.

Durability and reliability are hallmarks of the Peavey brand, and the Penta is no exception. Built with high-quality components and a rugged chassis, it is engineered to withstand the rigors of live performances and touring.

In summary, the Peavey Penta Tube Amplifier offers a compelling blend of traditional tube amp characteristics and modern technological advancements. With its robust tonal options, powerful scalability, and dependable construction, it stands as an impressive choice for any guitarist looking to elevate their sound. Whether you're performing live or writing in the studio, the Penta's rich tone and flexibility make it a prized addition to any musician's arsenal.