IOGear GCS52U installation manual Operations

Page 13

Operation

Operations

MiniView™ Micro allows you to access the computers through Hot Key combinations from the keyboard.

1. Selecting computers

You can toggle between the two computers by pressing and releasing the Scroll Lock key twice: [Scroll Lock]+[Scroll Lock].

2. AutoScan Mode

The MiniView™ Micro USB KVM offers AutoScan feature and allows you to monitor the activity of the connected computers without taking the trouble of switching yourself.

Image 13

Contents Installation Manual GCS52U 2-Port KVM Switch with Built-in KVM CablesMiniView Micro USB 2003 IOGEAR. All Rights Reserved. PKG-M0073 Page Table of Contents This package contains Package ContentsOverview Features PS/2 connection USB port VGA connection Requirements4. VGA connector to the computer Introduction5. USB connector to the computer 3. PS/2 port for the console mouseStep Installation1. Connect your monitor VGA cable to the 4.Connect the VGA cable item# 4 that is built into the KVM cable of your MiniView Micro to the VGA port on your computer To switch between computers, tap the Scroll Lock key twice Turn the power of your computers onRepeat Step 2 for your second computer Operations OperationOperations con’d n Scan Interval LED Display AppendixPort is connected to an active computer, and is being accessed in ActivitySpecification Specification Con’d Troubleshooting Troubleshooting Con’d Technical Support Radio & TV Interference Statement Limited Warranty Contact info