IOGear GCS52U installation manual Operations con’d, n Scan Interval

Page 15

nScan Interval

Operation

Operations con’d

You can customize the scan interval time with the following Hot Key combination: [Left Shift] + [Right Shift] + [S] + [n].

[n] represents a number from 1 to 4 which sets the desired scan interval as shown in the table below:

nScan Interval

13 seconds

25 seconds

310 seconds

420 seconds

12

Image 15

Contents 2-Port KVM Switch with Built-in KVM Cables Installation Manual GCS52UMiniView Micro USB 2003 IOGEAR. All Rights Reserved. PKG-M0073 Page Table of Contents This package contains Package ContentsOverview Features PS/2 connection USB port VGA connection Requirements3. PS/2 port for the console mouse Introduction4. VGA connector to the computer 5. USB connector to the computerInstallation Step1. Connect your monitor VGA cable to the 4.Connect the VGA cable item# 4 that is built into the KVM cable of your MiniView Micro to the VGA port on your computer Turn the power of your computers on To switch between computers, tap the Scroll Lock key twiceRepeat Step 2 for your second computer Operations OperationOperations con’d n Scan Interval Activity AppendixLED Display Port is connected to an active computer, and is being accessed inSpecification Specification Con’d Troubleshooting Troubleshooting Con’d Technical Support Radio & TV Interference Statement Limited Warranty Contact info