IOGear GCS52U Appendix, LED Display, Activity, Function, Port is not selected, On Steady

Page 16

Appendix

Appendix

LED Display

	Activity	Function

	Off	Port is not selected

	On (Steady)	Port is connected to an active computer

	Flashing	Port is connected to an active computer, and is being accessed in
	Flashing	AutoScan Mode
		AutoScan Mode

13

Image 16

Contents Installation Manual GCS52U 2-Port KVM Switch with Built-in KVM CablesMiniView Micro USB 2003 IOGEAR. All Rights Reserved. PKG-M0073 Page Table of Contents Package Contents This package containsOverview Features Requirements PS/2 connection USB port VGA connectionIntroduction 4. VGA connector to the computer5. USB connector to the computer 3. PS/2 port for the console mouseStep Installation1. Connect your monitor VGA cable to the 4.Connect the VGA cable item# 4 that is built into the KVM cable of your MiniView Micro to the VGA port on your computer To switch between computers, tap the Scroll Lock key twice Turn the power of your computers onRepeat Step 2 for your second computer Operation OperationsOperations con’d n Scan Interval Appendix LED DisplayPort is connected to an active computer, and is being accessed in ActivitySpecification Specification Con’d Troubleshooting Troubleshooting Con’d Technical Support Radio & TV Interference Statement Limited Warranty Contact info