IOGear GCS52U installation manual IOGEAR. All Rights Reserved. PKG-M0073

Page 2

©2003 IOGEAR. All Rights Reserved. PKG-M0073

IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc. Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc. IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change without notice. IOGEAR, Inc. assumes no responsibility for any inaccuracies or errors that may appear in this document.

Image 2

Contents MiniView Micro USB 2-Port KVM Switch with Built-in KVM CablesInstallation Manual GCS52U 2003 IOGEAR. All Rights Reserved. PKG-M0073 Page Table of Contents Package Contents This package containsOverview Features Requirements PS/2 connection USB port VGA connection5. USB connector to the computer Introduction4. VGA connector to the computer 3. PS/2 port for the console mouse1. Connect your monitor VGA cable to the InstallationStep 4.Connect the VGA cable item# 4 that is built into the KVM cable of your MiniView Micro to the VGA port on your computer Repeat Step 2 for your second computer Turn the power of your computers onTo switch between computers, tap the Scroll Lock key twice Operation OperationsOperations con’d n Scan Interval Port is connected to an active computer, and is being accessed in AppendixLED Display ActivitySpecification Specification Con’d Troubleshooting Troubleshooting Con’d Technical Support Radio & TV Interference Statement Limited Warranty Contact info