IOGear GCS52U installation manual Installation, Step, Repeat for your second computer

Page 12

Repeat Step 2 for your second computer.

Installation

Step. 3

Repeat Step 2 for your second computer.

Step. 4

Turn the power of your computers on.

To switch between computers, tap the Scroll Lock key twice.

9

Image 12

Contents 2-Port KVM Switch with Built-in KVM Cables Installation Manual GCS52UMiniView Micro USB 2003 IOGEAR. All Rights Reserved. PKG-M0073 Page Table of Contents Package Contents This package containsOverview Features Requirements PS/2 connection USB port VGA connectionIntroduction 4. VGA connector to the computer5. USB connector to the computer 3. PS/2 port for the console mouseInstallation Step1. Connect your monitor VGA cable to the 4.Connect the VGA cable item# 4 that is built into the KVM cable of your MiniView Micro to the VGA port on your computer Turn the power of your computers on To switch between computers, tap the Scroll Lock key twiceRepeat Step 2 for your second computer Operation OperationsOperations con’d n Scan Interval Appendix LED DisplayPort is connected to an active computer, and is being accessed in ActivitySpecification Specification Con’d Troubleshooting Troubleshooting Con’d Technical Support Radio & TV Interference Statement Limited Warranty Contact info