IOGear GCS52U installation manual Installation, Step

Page 11

4.Connect the VGA cable (item# 4) that is built into the KVM cable of your MiniView™ Micro to the VGA port on your computer.

3	4
	Installation

Step. 2

4.Connect the VGA cable (item# 4) that is built into the KVM cable of your MiniView™ Micro to the VGA port on your computer.

5.Connect the USB cable (item# 5) that is built into the KVM cable of your MiniView™ Micro to the USB port on your computer.

5

4

8

Image 11

Contents MiniView Micro USB 2-Port KVM Switch with Built-in KVM CablesInstallation Manual GCS52U 2003 IOGEAR. All Rights Reserved. PKG-M0073 Page Table of Contents This package contains Package ContentsOverview Features PS/2 connection USB port VGA connection Requirements3. PS/2 port for the console mouse Introduction4. VGA connector to the computer 5. USB connector to the computer1. Connect your monitor VGA cable to the InstallationStep 4.Connect the VGA cable item# 4 that is built into the KVM cable of your MiniView Micro to the VGA port on your computer Repeat Step 2 for your second computer Turn the power of your computers onTo switch between computers, tap the Scroll Lock key twice Operations OperationOperations con’d n Scan Interval Activity AppendixLED Display Port is connected to an active computer, and is being accessed inSpecification Specification Con’d Troubleshooting Troubleshooting Con’d Technical Support Radio & TV Interference Statement Limited Warranty Contact info