Software Installation
Windows XP Fresh Installation
1.Power off the system. Insert the controller card into a PCI slot and connect the hard drives to the controller card. Power up the system.
2.Put your Windows XP CD into the
3.Press F6 for third party SCSI or driver installation. Press ‘S’ when setup asks if you want to specify an additional device. Press ‘Enter’ and select ‘[CD Drive Letter]:\ SATA PCIe_ Raid5_2Port \SiI3132\Windows\Driver’.
4.Press ‘Enter’ to continue.
5.Follow the setup instructions to select your choice for partitions and the file system.
6.After setup examines your disks, it will copy files to the Windows installation folders and restart the system. The setup program will continue and finish the installation after restart.
7.Wait until Windows finishes installing devices, regional settings, networking settings, and components. Reboot the system if it is stated as a requirement.
19