11.Use the SATARAID5 Manager GUI to configure your RAID settings.
If using 1 Disk, please select “Concatenate” or “Contiguous” settings only. If using 2 Disks, do NOT select “Parity RAID” or “Mirrored Stripe” settings. If using 3 Disks, do NOT select the “Mirrored Stripe” setting.
12.Open “Task Manager” to make sure the RAID setup is completed. RAID5 can take hours to complete, please be aware of these time requirements.
13.Use Device Manager for hard disk initialization, partition and formatting within Windows.
13