IOGear GICe702S3R5W6, M0557 manual

Page 21

4.Insert the Driver CD in your CD-ROM/ DVD drive, check Specify a location, uncheck the other boxes, click Next, type in your CD-ROM/DVD Drive Letter and Click Browse.

5.Specify the following location: [CD Drive Letter]:\SATA PCIe_Raid5_2Port\ SiI3132\ Windows\Driver. Select Open then click OK.

6.When the wizard indicates that it found a driver for the device click ‘Next’.

7.The wizard will now copy the required ﬁles to the system. After installation the wizard will display a completion dialog, click ‘Finish’ to exit the wizard.

21

Image 21

Contents Installation Guide Page Table of Contents Page Page Introduction Features Package Contents RAID Redundant Array of Independent Disks What Is RAID?Disk Striping RAID Disk Mirroring RAIDParity RAID RAID Mirrored-Striping RAID 0+1 also known as RAIDJust a Bunch of Disks JBOD/Contiguous Installation Procedure Use the SATARAID5 Manager GUI to conﬁgure your RAID settings Creating Striped Sets RAID Bios RAID SettingsSelect Create RAID set. Press Enter Select the Number of hard drives. Press EnterSelect Auto conﬁguration. Press Enter Creating Mirrored Sets RAIDCreating a Mirrored-Striped Set RAID Select Create RAID set. Press F2Creating Parity RAID RAID Creating Jbod Sets Creating Spare DriveSelect Spare Drives. Press Enter Deleting RAID Sets Select Delete RAID set. Press EnterRebuilding Mirrored Sets RAID Windows XP Fresh Installation Software InstallationWindows XP Existing Installation Page Verifying Controller Installation Federal Communications Commission FCC Statement Page CE Statement Limited Warranty Toll Free 866 9-IOGEAR Phone 949 453-8782 23 Hubble ContactFUN